When sticking occurs, immediately reduce the axial thrust, strengthen Rotary and washing, so as to gradually become normal. Such as severe sticking, must be stopped immediately Used submersible drilling rig, plus torque and tension tools, rotary drilling tool loose imported second-hand submersible drilling rig, to drill and side air side, until it is restored to normal. In normal operation, the secondary hole drilling, when the air pressure falls below the road 0.35MPa, should stop to check. Promoting rope should always adjust the tightness of the machine, as well as the lifting pulley block, the reliability of the lower limit switch work; you can not operate correctly, it should be repaired in operation, always check the lubrication of moving parts, can not be short of oil. When the rig displacement should adjust the carriage and boom to maintain body balance. After the operation is completed, the latest second-hand submersible drilling rig, drill hole submersible vehicles should be parked in a safe location, cleaning, lubrication. Shanxi Kisan compressor briefly hole drilling in the course of things to note: (1) each bearing spindle and the lubrication gear portion; (2) Check the brake band and the guide pulley transmission and cable laying conditions; (3) Check the chain, track, clutch tightness; (4) Winter power transmission must be idle three minutes; (5) submersible drilling rig in transit is not allowed on non-staff car, prohibit motor chamber was in the car to rest. Used hole drilling air compressor _ _ Qishan submersible drilling rig used by Shanxi Kisan Compressor Leasing Corporation. Used hole drilling air compressor _ _ Qishan Used submersible drilling rig in Shanxi Qishan Compressor Rental Co., Ltd. (www.qskyjzl.com) (www.qskyjzl.com) this year introduced a new upgrade, the above picture is for reference Please call the telephone or pictures on this page, for the latest information, contact: Li.